- Fruit Dryer Machine
- Herbal Drying Machine
- Spices Dryer Machine
- Food Dryer Machine
- Washing Systems
- Slicing Systems
The Chili Dryer Machineare used for drying the chili,pepper and other vegetables, The drying is one of the most important step during the chili processing.After drying, teh chili can be more easy to reserve,or it can be milled by grinding machine to reach higher efficient use value.
The chili drying system is consists of feeding conveyor, belt dryer host, discharge conveyor, heat exchange furnace, hot air induced draft fan, exhaust fan,control panel.
According to variety of chili and different water content , we make different drying scheme .
Heat source can be choose from natural gas,diesel,oil,electricity,coal or wood chips.We will recommend the most efficient heat system to get the best drying effect according to your condition.
The material is placed on the conveyor belt, through the switch-plate device on the conveyor belt, spread the belt evenly, with “S” shape running inside of drying machine.Induced draft fan to produce hot air evenly dispersed inside the dryer, due to the lower pressure is greater than above pressure, hot air upward movement naturally, through each layer of mesh belt, make the material in contact with the hot air fully and achieve the purpose of drying.
1.Uniform drying effect--The chili keep moving on the belt, during this process, both side of the material can fully contact the hot air. So that the drying effect can be uniform.
2.Drying time--Our drying adopt to centrifugal fan with modelY4-73, the flow can achieve flow 54526 m3/hour, the fully hot air greatly shorten the drying time, it can drying chili pepper within 2-4hours.
3.Adjustable speed--Drying temperature,moisture can be ajusted by the control panel by adjust the mesh belt running speed and air rate.
4.Energy saving--Only small electricity consumption, saving 60% running cost.
5.Various fuel--Dryer machine can use coal, wood, gas, diesel, electricity, can meet different customer requirements.
|Spread thickness of material(mm)||50-200|
|heat exchange furnace(M)||3.2*1*2.7||3.9*1.26*3||3.9*1.26*3||4.7*1.5*3||4.7*1.5*3|
|Induced draft fan(kw)||11||15||15||22||22|
|LP gas consumption (90 degree fanrenheit)||20m³/H||25m³/H||28m³/H||30m³/H||36m³/h|
|Place requirement (W*L*H)M||4.5*14*2.7||5*19*2.8||4.5*20*2.8||5.5*21*2.8||5.5*23*2.8|
please fill in your details below and we will be in contact with you shortly to discuss your requirements and answer any question you may have.