- Fruit Dryer Machine
- Herbal Drying Machine
- Spices Dryer Machine
- Food Dryer Machine
- Washing Systems
- Slicing Systems
hemp dryer machine mainly used to dry flowers, leaves, stems,seeds etc..
It is the best choice for low temperature drying. It have high medical value.Our hemp drying machine is most popular in the united state,Canada, bulgaria etc.
The purpose: extract hemp oil.
The purpose after drying:
Normally the input moisture: 80-85%, the output moisture: 8-10%.
The fuel: gas,diesel,wood chips,electricity,steam.
Features of Multi-Layer Hemp Dryer Machine:
The drying machine with fully automatic feeding and discharging.
Fast drying system,the drying machine not only according to heat to dry, but also according to strong air.
Drying machine with movable door, easy to clean.
The temperature and speed of the dryer can control by control panel.
Hemp Dryer Machine Including: Average material institutions,Feeding Conveyor,Discharging Conveyor,Electronic control system,Dryer hos,Enter the wind system,Heat source.
The working principle of hemp drying machine:
Hemp flower and hemp leaf are transported by the feeding conveyor to the inside of the dryer. The material passes from the first layer to the last layer via the conveyor belt, and the dried material is conveyed by the discharge conveyor. The hemp dryer is using hot air as the drying medium. The hot air passes through the material from the bottom to top. The final moisture comes out of the top of the hemp dryer. The drying machine not only rely on heat to dry, but also through the strong air.So it can increase the drying efficiency and reduce the drying time.
For our drying machine not only according to heat to dry, but also according to strong air.
The purpose after drying:
Dried hemp leaves and flower have two purposes. 1. Extraction of hemp oil (used in the United States) 2. Crystallization (More in European) The general process is drying, extraction, concentration, and crystallization. Design different equipment according to different customer requirements
If you want to smash some fresh hemp plants before drying, please go to our page "hemp shredder" for detailed instructions.
|Spread thickness of material(mm)||50-200|
|heat exchange furnace(M)||3.2*1*2.7||3.9*1.26*3||3.9*1.26*3||4.7*1.5*3||4.7*1.5*3|
|Induced draft fan(kw)||11||15||15||22||22|
|LP gas consumption (90 degree fanrenheit)||20m³/H||25m³/H||28m³/H||30m³/H||36m³/h|
|Place requirement (W*L*H)M||4.5*14*2.7||5*19*2.8||4.5*20*2.8||5.5*21*2.8||5.5*23*2.8|
please fill in your details below and we will be in contact with you shortly to discuss your requirements and answer any question you may have.