industry value solution welcome to guoxin
products
leaf drying machine
  • leaf drying machine
  • leaf drying machine
  • leaf drying machine

leaf drying machine

Product description:
The leaf drying machine is the ideal drying equipment for drying herbaceous plants. The temperature of the equipment is controllable, which is sufficient to guarantee the quality of the finished product.

We are offering leaf drying machine to our clients.

  • Product Description
  • parameter

The continuous belt type leaf dryer uses clean hot air as a drying medium, it can process spices and herbs such as curry leaf, bay leaf, spicy wood leaf, herbal basil leaf, fenugreek leaf, neem leaf and mint leaf, it can effectively preserve the property, quality and color of raw materials, and meet the processing requirements of herbs and spices.

Bay leaf dryerDried bay leaves

The components of leaf drying machine:

  1. Feeding conveyor(Fresh material enters the dryer through the conveyor for drying)
  2. Discharge conveyor (Used to transport dried materials)
  3. Drying host ( the material loading into drying host mesh belt and move forward from top layer to bottom layer)
  4. Fan (Provide sufficient air volume to the dryer, the dryer not only according to heat to dry, but also takes enough air volume to improve the drying efficiency.)
  5. Heat exchange furnace ( providing heat for drying machine,the cold air and hot air make exchange,finally the suitable drying temperature enter into the dryer absorb by fan)
  6. Control panel (control speed and temperature.)

Fuel: Wood,biomass,gas,diesel,propane,steam,electricity.

leaves drydr connection diagram

Feature / Advantage:

The drying medium is pure and will not contaminate the raw material.

Continuous mesh belt movement ensures even and consistent dehydration of plant material.

With medium and low temperature drying mode, the dried material has good color, small deformation and little loss of nutrients.

Electronic controls allow operators to dial-in optimum air volume, belt speed, and temperature.

Each layer of mesh belt is equipped with a material stop and guide plate to prevent materials from falling directly from the upper layer to the next layer.

Convenient door handles allow panel access to view the status of the drying operation.

Model(Width*Length) GX1.5-6-4 GX2-8-4 GX2-9-4 GX2-10-4 GX2-12-4
Layers 4
Drying area(㎡) 29 45 51 57 69
Spread thickness of material(mm) 50-200
Working temperature(℃) 0-120
Drying time(hour) 0.1-5
heat exchange furnace(M) 3.2*1*2.7 3.9*1.26*3 3.9*1.26*3 4.7*1.5*3 4.7*1.5*3
Induced draft fan(kw) 11 15 15 22 22
Exhaust fan(kw) 1.5 2.2
Feeding conveyor(kw)     1.5             2.2     2.2     2.2      3
Discharge conveyor(kw) 0.55
Total power(kw) 14.55 19.25 19.95 26.95 27.75
LP gas consumption (90 degree fanrenheit) 20m³/H 25m³/H 28m³/H 30m³/H 36m³/h
Electricity consumption 25kwh 30kwh 35kwh 40kwh 45kwh
Place requirement (W*L*H)M 4.5*14*2.7 5*19*2.8 4.5*20*2.8 5.5*21*2.8 5.5*23*2.8

Inquire About Our leaf drying machine

Please fill out the form below and we will get back to you within 24 hours of your submission.